AGG Software Forums

Online Help Center => Software for DNC and CNC => Topic started by: pan on February 07, 2014, 01:27:07 PM

Title: nc file - program
Post by: pan on February 07, 2014, 01:27:07 PM
which program can i use to make my nc file? i work a little bit with metalix but the file called *.anc .is that file ok with dnc?

try for first time to conect amada 245 with dnc


Title: nc file program
Post by: FrankTrurb on April 07, 2019, 03:57:28 AM
The control is Fanuc 0i-T.
No problem transefring file from lathe to pc exept loosing  at program ends.
When transfering from pc to lathe, an allarm generated.
Any suggestions?

Title: Re: nc file - program
Post by: Arthur Grasin on April 08, 2019, 07:20:41 AM

Please, try to receive a very small program (2-3 lines) from the machine first.
It will help to find the correct settings.

1. Right click over the machine and select "Show transferred data."
2. Try to receive a small program from the machine manually.
3. In the "Transferred data" window you'll see incoming data.
4. Resize the window that all received data will be visible (_including_ the right column).

Please, send me a screenshot of the received data. I'll verify it.