AGG Software Forums
August 24, 2019, 06:48:10 PM *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News: Welcome on our forum!
 
   Home   Help Search Login Register  

Pages: [1]
  Print  
Author Topic: nc file - program  (Read 6240 times)
pan
Newbie
*

Karma: +0/-0
Posts: 2


View Profile
« on: February 07, 2014, 01:27:07 PM »

which program can i use to make my nc file? i work a little bit with metalix but the file called *.anc .is that file ok with dnc?

try for first time to conect amada 245 with dnc

thanks
Logged
FrankTrurb
Newbie
*

Karma: +0/-0
Posts: 2


View Profile
« Reply #1 on: April 07, 2019, 03:57:28 AM »

The control is Fanuc 0i-T.
No problem transefring file from lathe to pc exept loosing  at program ends.
When transfering from pc to lathe, an allarm generated.
Any suggestions?
Logged
Arthur Grasin
Tech. Support
Administrator
Hero Member
*****

Karma: +0/-0
Posts: 765



View Profile WWW
« Reply #2 on: April 08, 2019, 07:20:41 AM »


Please, try to receive a very small program (2-3 lines) from the machine first.
It will help to find the correct settings.

1. Right click over the machine and select "Show transferred data."
2. Try to receive a small program from the machine manually.
3. In the "Transferred data" window you'll see incoming data.
4. Resize the window that all received data will be visible (_including_ the right column).

Please, send me a screenshot of the received data. I'll verify it.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines