Print Page - Hex Data

Title: Hex Data
Post by: cahuk on July 17, 2011, 01:05:57 PM

I have the following string showing in the Data logger window.

<20110717060145.515>
#08#0F#F1#D4#FF#03#B1#00#09#98

I need to parse this data and grab the #09 section. But in the DDE I keep getting nothing or junk. I'm using the Ascii Parser and trying to parse as a string. Then I have an expression Value = WORDTOSTR(Value). I thought saw that in another thread but any help would be appreciated.

Thanks

Title: Re: Hex Data
Post by: Arthur Grasin on July 01, 2014, 07:00:00 AM

1. Configure the parser to split data by timeout
2. Add a parser item with the "Value" name and extract last 2 bytes from a fixed position
3. Your expression is valid

Title: Re: Hex Data
Post by: cahuk on July 03, 2014, 07:00:00 AM

I can set a fixed Position of 4 with a length of 2 and I get 65492 (FFD4) which seems right but if I increase fixed position to 5 or above (length remains 2) I get no data.

thanks for the help with a newbie!!

Found the issue I had to uncheck Trim spaces from left & right in Data format.

AGG Software Forums

Online Help Center => Data loggers and plug-ins => Topic started by: cahuk on July 17, 2011, 01:05:57 PM