Attached are screenviews of all my main configuration settings for the dead-band plug-in

I am now having trouble with the normal filter.  I have it set up as follows:

Not Contains, Text, ?, Ignore.

I attached what the screen showed and what the filter actually produced.  The filter seems to have ignored the first two events completely and only recorded the third.  I have no idea what I am doing wrong   ...  Please help

After trying several times, it seems as though when I have more than 4 stable points (ones without ? which are supposed to be filtered, the filter then only logs the most recent cluster of unstable points (points with ?).

Thanks!

Could you elaborate on how the four deadband settings work?  I read this page http://www.aggsoft.com/serial-data-logger/plugins/deadband.pdf but I didn't find it very clear how they functioned.

As I read it, for absolute you give a value and if the next value changes by less than the absolute value of this number it will not be recorded.  When I tried this, it did reduce the first set of data points, but after the weight value changed, it would not eliminate any more of the points.  Am I not understanding this setting correctly?

These were the actual readings:
<07.25.2012 10:15:59.113>SUI       1207.0 g 
<07.25.2012 10:16:00.703>SUI       1207.0 g 
<07.25.2012 10:16:02.343>SUI       1207.0 g 
<07.25.2012 10:16:04.031>SUI ?     1217.7 g 
<07.25.2012 10:16:05.734>SUI ?     1223.6 g 
<07.25.2012 10:16:07.437>SUI ?     1228.4 g 
<07.25.2012 10:16:09.125>SUI ?     1231.3 g 
<07.25.2012 10:16:10.796>SUI ?     1227.0 g 
<07.25.2012 10:16:12.421>SUI ?     1206.9 g 
<07.25.2012 10:16:14.046>SUI ?     1206.9 g 
<07.25.2012 10:16:15.734>SUI ?     1225.2 g 
<07.25.2012 10:16:17.421>SUI ?     1206.9 g 
<07.25.2012 10:16:19.031>SUI ?     1284.7 g 
<07.25.2012 10:16:20.718>SUI ?     1184.0 g 
<07.25.2012 10:16:22.328>SUI ?      721.1 g 
<07.25.2012 10:16:24.031>SUI ?      759.6 g 
<07.25.2012 10:16:25.718>SUI ?       14.6 g 
<07.25.2012 10:16:27.328>SUI ?       14.5 g 
<07.25.2012 10:16:29.015>SUI ?       14.6 g 
<07.25.2012 10:16:30.625>SUI ?       14.6 g 
<07.25.2012 10:16:32.312>SUI         14.6 g 
<07.25.2012 10:16:34.015>SUI         14.6 g 
<07.25.2012 10:16:35.609>SUI         14.6 g 
<07.25.2012 10:16:37.203>SUI         14.6 g 


Then the deadband plug-in gave:
<07.25.2012 10:15:59.113>SUI       1207.0 g 

<07.25.2012 10:16:04.031>SUI ?     1217.7 g 
<07.25.2012 10:16:05.734>SUI ?     1223.6 g 
<07.25.2012 10:16:07.437>SUI ?     1228.4 g 
<07.25.2012 10:16:09.125>SUI ?     1231.3 g 
<07.25.2012 10:16:10.796>SUI ?     1227.0 g 
<07.25.2012 10:16:12.421>SUI ?     1206.9 g 
<07.25.2012 10:16:14.046>SUI ?     1206.9 g 
<07.25.2012 10:16:15.734>SUI ?     1225.2 g 
<07.25.2012 10:16:17.421>SUI ?     1206.9 g 
<07.25.2012 10:16:19.031>SUI ?     1284.7 g 
<07.25.2012 10:16:20.718>SUI ?     1184.0 g 
<07.25.2012 10:16:22.328>SUI ?      721.1 g 
<07.25.2012 10:16:24.031>SUI ?      759.6 g 
<07.25.2012 10:16:25.718>SUI ?       14.6 g 
<07.25.2012 10:16:27.328>SUI ?       14.5 g 
<07.25.2012 10:16:29.015>SUI ?       14.6 g 
<07.25.2012 10:16:30.625>SUI ?       14.6 g 
<07.25.2012 10:16:32.312>SUI         14.6 g 
<07.25.2012 10:16:34.015>SUI         14.6 g 
<07.25.2012 10:16:35.609>SUI         14.6 g 
<07.25.2012 10:16:37.203>SUI         14.6 g 

(Reduces the first set of excess data points, but not the second (14.6))

I tried to get the deadband plug-in to get rid of the stable data points, but it is not working as I thought it would. Can you give me any more information on how to set this up so I can maintain a stable point before and after the unstable ones (unstable if have "?") but get rid of all the rest?

I am currently using Advanced Data Logger with an RS-232 cable from a scale.  I am now trying to send my get data command (SUI CR LF) to the scale every second which will record a point every second into my log file.

I have pretty much followed the example given at http://www.aggsoft.com/asdl-pressure-data-logger.htm

I am receiving data currently but it is coming in and getting put into the log file at the 9600 baud rate instead of every second.

What am I doing wrong??  

I understand that that it is possible to just get the data with "?", but I also need some data points that do not contain the "?", specifically the weights that occur before and after the "?" so how would I use the filter to accomplish this?

Also do I need any plug ins to use the filter?

Is there any way in Advanced Data Logger to choose which data is logged?   

   I am tracking weight data from a Citizen Scale SSH-94 balance and I am receiving data perfectly by setting up the parser so I get a time stamp and then my data each on its own line as shown below. 

     Currently the data logging speed is subject only to the baud rate which is giving me too many data points even at the lowest baud rate.  For my purposes, the balance will be idle a majority of the time and the weight will be unstable very rarely.  The unstable weight measures are preceded by a '?' character.  I was wondering if there is a way to only record one of the stable data points (when there is not a '?')?  So instead of recording 0 grams for 500 lines, it would only be recorded once while the value isn't changing.  This would greatly reduce my unnecessary data points and would give a log like the second one below.

Thanks!


Current:
<07.12.2012 16:38:52.562>SI          0.0 g 
<07.12.2012 16:38:52.656>SI          0.0 g 
<07.12.2012 16:38:52.750>SI          0.0 g 
<07.12.2012 16:38:52.859>SI          0.0 g 
<07.12.2012 16:38:52.953>SI          0.0 g 
<07.12.2012 16:38:53.046>SI ?        0.2 g 
<07.12.2012 16:38:53.156>SI ?        5.9 g 
<07.12.2012 16:38:53.250>SI ?        7.7 g 
<07.12.2012 16:38:53.359>SI ?       10.1 g 
<07.12.2012 16:38:53.453>SI ?       12.0 g 
<07.12.2012 16:38:53.562>SI ?       13.8 g 
<07.12.2012 16:38:53.656>SI ?       15.6 g 
<07.12.2012 16:38:53.750>SI ?       17.2 g 
<07.12.2012 16:38:53.859>SI ?       17.2 g 
<07.12.2012 16:38:53.953>SI ?       17.2 g 
<07.12.2012 16:38:54.046>SI ?       15.1 g 
<07.12.2012 16:38:54.156>SI ?       14.5 g 
<07.12.2012 16:38:54.578>SI ?       14.5 g 
<07.12.2012 16:38:54.687>SI ?       14.5 g 
<07.12.2012 16:38:54.765>SI ?       14.5 g 
<07.12.2012 16:38:54.843>SI ?       14.5 g 
<07.12.2012 16:38:54.953>SI ?       14.5 g 
<07.12.2012 16:38:55.046>SI ?       14.5 g 
<07.12.2012 16:38:57.031>SI ?       14.5 g 
<07.12.2012 16:38:57.140>SI ?       14.5 g 
<07.12.2012 16:38:57.250>SI         14.5 g 
<07.12.2012 16:38:57.343>SI         14.5 g 
<07.12.2012 16:38:57.453>SI         14.5 g 
<07.12.2012 16:38:57.546>SI         14.5 g 
<07.12.2012 16:38:57.656>SI         14.5 g 
<07.12.2012 16:38:57.750>SI         14.5 g 

Desired:

<07.12.2012 16:38:52.953>SI          0.0 g 
<07.12.2012 16:38:53.046>SI ?        0.2 g 
<07.12.2012 16:38:53.156>SI ?        5.9 g 
<07.12.2012 16:38:53.250>SI ?        7.7 g 
<07.12.2012 16:38:53.359>SI ?       10.1 g 
<07.12.2012 16:38:53.453>SI ?       12.0 g 
<07.12.2012 16:38:53.562>SI ?       13.8 g 
<07.12.2012 16:38:53.656>SI ?       15.6 g 
<07.12.2012 16:38:53.750>SI ?       17.2 g 
<07.12.2012 16:38:53.859>SI ?       17.2 g 
<07.12.2012 16:38:53.953>SI ?       17.2 g 
<07.12.2012 16:38:54.046>SI ?       15.1 g 
<07.12.2012 16:38:54.156>SI ?       14.5 g 
<07.12.2012 16:38:54.578>SI ?       14.5 g 
<07.12.2012 16:38:54.687>SI ?       14.5 g 
<07.12.2012 16:38:54.765>SI ?       14.5 g 
<07.12.2012 16:38:54.843>SI ?       14.5 g 
<07.12.2012 16:38:54.953>SI ?       14.5 g 
<07.12.2012 16:38:55.046>SI ?       14.5 g 
<07.12.2012 16:38:57.031>SI ?       14.5 g 
<07.12.2012 16:38:57.140>SI ?       14.5 g 
<07.12.2012 16:38:57.250>SI         14.5 g