PC recieves file from machine, machine doesn't recieve file from PC

[yadin.ran]

The control is Fanuc 0i-T.
No problem transefring file from lathe to pc (exept loosing % at program ends).
When transfering from pc to lathe, an allarm generated.
Any suggestions?

[Arthur Grasin]

1. Please, open the "Transferred data" window. Right-click over the machine in the list and select the "Show transferred data" menu item.

2. Try to receive a small program from the machine

3. Attach a screenshot with received data.

[yadin.ran]

Attached please find required screenshot.
The problem is only with sending file from pc to machine.
Thanks,
Ran

[Arthur Grasin]

Please, expand the window and make the full screenshot.

[yadin.ran]

OK

[Arthur Grasin]

Please, try the following settings:

[yadin.ran]

Now no alarm appears, but LSK keeps blinking on the control's display.
Attached the file of transfered data screenshot.

[Arthur Grasin]

It seems that your program already contains % characters at the end. In this case, please, enable the "starting/ending characters stored in the file" options.

[yadin.ran]

Sorry, no change

[Arthur Grasin]

Please, try to send a very small program (just 2-3 lines) from the machine and attach the window with whole program. It is possible we should modify a header.

[yadin.ran]

OK, here it is

[Arthur Grasin]

Please, change the following settings. The "program begin" option contains a space between % and #0D.

[yadin.ran]

Sorry, no change. LSK keeps blinking on the control's display.
Attached the file of transfered data screenshot.

[Arthur Grasin]

You've attached the screenshot when you've transferred data from the computer to the machine. I need a screenshot when you'll transfer data from the machine to the computer. Please, a very small program from the machine. In this case I can see the format of data that uses your machine.

[yadin.ran]

OK, attached.
Attached also: Receive Data Exchange.
(Receiving is going with no problems)