Extreamly slow monitor output / solved

[jarold@paylink.se]

Hi, I'm using the monitor to record traffic between an external device and a program on the same machine were I run the monitor. I use a USB serial port adapeter which I also used when using version 3.5 of the monitor. I bought the new version of the monitor since my computer crashed and so on. However, now the display and I beleive the proticol file output works extreamly slow. Long after I disconnect the cable the monitor keeps indicating it receives data, like in 1200 baud. Same thing on both Vista an XP. The actual communication works fine but as it is I have no use for the monitor.
Any clue?

/Anders

[Arthur Grasin]

Are you using the program on a x86 or x64 system?

[jarold@paylink.se]

x86 system. Same machine I used with version 3.5.

[Arthur Grasin]

Please, download the new version of the driver here and replace the original file in windows\system32\drivers folder with the new file from the archive. Then, please, reboot the PC.

http://www.aggsoft.com/download/beta/aspmon20091102.zip

Please, let me know about results.

[jarold@paylink.se]

No luck.
One thing I find strange is that the status bar at the bottom always shows Bytes received: 1, and that will ofcourse slowthings down if interrupting on every byte.
Now when it finally has stopped it shows Bytes sent: 15, but when I received a message of 275 bytes it kept showing "Bytes reveived: 1".

[Arthur Grasin]

Unfortunately, we can't reproduce this problem and solve it. Does this problem appear with other serial ports?

[jarold@paylink.se]

Sorry, there was obviously something I forgot. Since I last used aspmon version 3.5 some years ago, I also got a new version of the component I'm using for reading the port. Earlier version must have been using an internal buffer since my code is reading 1 byte from that component. I have just changed my code to use a buffer in which to read all bytes ready at once, and then ofcourse aspmon works like I used to see it.
Thanks

[Arthur Grasin]

Is it possible you can send us your non-optimized application and we'll test our software with it?